Personnel Information

写真a

ASHIDA Maki


Job title

Visiting Lecturer

Mail Address

ashida.met@tmd.ac.jp

Campus Career 【 display / non-display

  • 2013.04
    -
    2022.03
    Tokyo Medical and Dental University, Institute of Biomaterials and Bioengineering, Biomedical Materials, Metallic Biomaterials, Assistant Professor
  • 2013.04
    -
    Now
    Tokyo Medical and Dental University, Graduate School of Medical and Dental Sciences, Life Science and Technology, Life Science and Technology, Metallic Biomaterials, Assistant Professor
  • 2013.04
    -
    Now
    Tokyo Medical and Dental University, Graduate School of Medical and Dental Sciences, Medical and Dental Sciences, Maxillofacial and Neck Reconstruction, Metals, Assistant Professor
  • 2022.04
    -
    Now
    Tokyo Medical and Dental University, Institute of Biomaterials and Bioengineering, Biomedical Materials, Metallic Biomaterials, Visiting Lecturer
 

Published Papers & Misc 【 display / non-display

  1. Ashida M, Hanai M, Chen P, Hanawa T. Developing microstructure and enhancing strength of Ti–6Al–7Nb alloy with heat treatment processed by high-pressure torsion Mater Trans. 2022.06; 63 (6): 948-956. ( DOI )

  2. Sato H, Chen P, Ashida M, Tsutsumi Y, Harada H, Hanawa T. Evaluation of cytocompatibility and osteoconductivity of Zr-14Nb-5Ta-1Mo alloy with MC3T3-E1 cells Dent Mater J. 2022.06; 41 (3): 421-428. ( PubMed, DOI )

  3. Eda Y, Manaka T, Hanawa T, Chen P, Ashida M, Noda K. X-ray photoelectron spectroscopy-based valence band spectra of passive films on titanium Surf Interface Anal. 2022; 54 892-898. ( DOI )

  4. Manaka T, Tsutsumi Y, Chen P, Ashida M, Katayama H, Hanawa T. Development of electrochemical surface treatment to visualize critical corrosion-inducing inclusions of Zr in chloride environments J Electrochem Soc. 2021.12; 168 121505. ( DOI )

  5. Tsutsumi Y, Ishimoto T, Oishi T, Manaka T, Chen P, Ashida M, Doi K, Katayama H, Hanawa T, Nakano T. Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316 L stainless steel fabricated via laser powder bed fusion Additive Manufact. 2021.09; 45 102066. ( DOI )

  6. Tsutsumi H, Tsutsumi Y, Shimabukuro M, Manaka T, Chen P, Ashida M, Ishikawa K, Katayama H, Hanawa T. Investigation of the long-term antibacterial properties of titanium by two-step micro-arc oxidation treatment Coatings. 2021.07; 11 (7): 798. ( DOI )

  7. Manaka T, Tsutsumi Y, Ashida M, Chen P, Katayama H, Hanawa T. Development of electrochemical surface treatment for improvement of localized corrosion resistance of zirconium in chloride environment Mater Trans. 2021.06; 62 (6): 788-796. ( DOI )

  8. Shimabukuro M, Tsutsumi H, Tsutsumi Y, Manaka T, Chen P, Ashida M, Ishikawa K, Katayama H, Hanawa T. Enhancement of antibacterial property of titanium by two-step micro arc oxidation treatment Dent Mater J. 2021.05; 40 (3): 592-598. ( PubMed, DOI )

  9. Hiji A, Hanawa T, Yokoi T, Chen P, Ashida M, Kawashita M. Time transient of calcium and phosphate ion adsorption by rutile crystal facets in Hanks' solution characterized by XPS Langmuir. 2021.03; 37 3597-3604. ( DOI )

  10. Tsutsumi Y, Muto I, Nakano S, Tsukada J, Manaka T, Chen P, Ashida M, Sugawara Y, Shimojo M, Hara N, Katayama H, Hanawa T. Effect of impurity elements on localized corrosion of zirconium in chloride containing environment J Electrochem Soc. 2020.11; 167 (14): 141507. ( DOI )

  11. Hiji A, Hanawa T, Shimabukuro M, Chen P, Ashida M, Ishikawa K. Initial formation kinetics of calcium phosphate on titanium in Hanks' solution characterized using XPS Surf Interface Anal. 2020.10; 53 (2): 185-193. ( DOI )

  12. Shimabukuro M, Tsutsumi Y, Nozaki K, Chen P, Yamada R, Ashida M, Doi H, Nagai A, Hanawa T. Investigation of antibacterials effect of copper introduced titanium surface by electrochemical treatment against facultative anaerobic bacteria Dent Materi J. 2020.08; 39 (4): 639-647. ( DOI )

  13. Shimabukuro M, Manaka T, Tsutsumi Y, Nozaki K, Chen P, Ashida M, Nagai A, Hanawa T. Corrosion Behavior and Bacterial Viability on Different Surface States of Copper Mater Trans. 2020.06; 61 (6): 1143-1148.

  14. Shimabukuro M, Hiji A, Manaka T, Nozaki K, Chen P, Ashida M, Tsutusmi Y, Nagai A, Hanawa T. Time-transient effects of silver and copper in the porous titanium dioxide layer on antibacterial properties J Funct Biomater. 2020.06; 11 (2): 44. ( PubMed, DOI )

  15. Ashida M, Tsutsumi Y, Homma K, Chen P, Shimojo M, Hanawa T. Design of zirconium quaternary system alloys and their properties Mater Trans. 2020.03; 61 (4): 776-781. ( DOI )

  16. Shimabukuro M, Ito H, Tsutsumi Y, Nozaki K, Chen P, Yamada R, Ashida M, Nagai A, Hanawa T. The effects of various metallic surfaces on cellular and bacterial adhesion Metals. 2019.10; 9 (11): 1145. ( DOI )

  17. Watanabe K, Ashida M, Masuda T, Kral P, Takizawa Y, Yumoto M, Otagiri Y, Sklenicka V, Hanawa T, Horita Z. Production of superplastic Ti-6Al-7Nb alloy using high-pressure sliding process Mater Trans. 2019.07; 60 (9): 1785-1791. ( DOI )

  18. Oishi M, Tsutsumi Y, Chen P, Nakaishi M, Ashida M, Doi H, Hanawa T. Surface characterization of commercially available yttria-stabilized tetragonal zirconia polycrystalline in water and Hanks’ solution using X-ray photoelectron spectroscopy Dent. Mater. J.. 2019.06; 38 (3): 496-504. ( DOI )

  19. Chen P, Aso T, Sasaki R, Ashida M, Tsutsumi Y, Doi H, Hanawa T . Adhesion and differentiation behaviors of mesenchymal stem cells on titanium with micrometer and nanometer-scale grid patterns produced by femtosecond laser irradiation J. Biomed. Mater. Res. A. 2018.07; ( PubMed, DOI )

  20. Ashida M, Morita M, Tsutsumi Y, Nomura N, Doi H, Chen P, Hanawa T. Effects of cold swaging on mechanical properties and magnetic susceptibility of the Zr–1Mo alloy Metals. 2018.06; 8 (6): 454. ( DOI )

  21. Oishi M, Tsutsumi Y, Chen P, Ashida M, Doi H, Hanawa T. Surface changes of yttria‐stabilized zirconia in water and Hanks solution characterized using XPS Surf Interface Anal. 2018.05; 50 (5): 587-591. ( DOI )

  22. Chen P, Aso T, Sasaki R, Tsutsumi Y, Ashida M, Doi H, Hanawa T . Micron/submicron hybrid topography of titanium surfaces influences adhesion and differentiation behaviors of the mesenchymal stem cells J Biomed Nanotechnol. 2017.03; 13 (3): 324-336. ( DOI )

  23. Tsutsumi Y, Ashida M, Nakahara K, Serizawa A, Doi H, Grandini CR, Rocha LA, Hanawa T. Micro arc oxidation of Ti-15Zr-7.5Mo alloy Mater. Trans.. 2016.12; 57 (12): 2015-2019. ( DOI )

  24. Tsustumi Y, Doi H, Nomura N, Ashida M, Chen P, Kawasaki A, Hanawa T. Surface composition and corrosion resistance of Co-Cr alloys containing high chromium Mater. Trans.. 2016.12; 57 (12): 2033-2040. ( DOI )

  25. Chen P, Ashida M, Doi H, Tsutsumi Y, Horita Z, Hanawa T . Cytocompatibility of Ti–6Al–7Nb through high-pressure torsion processing Mater Trans. 2016.11; 57 (12): 2020-2025. ( DOI )

  26. Kajima Y, Takaichi A, Nakamoto T, Kimura T, Yogo Y, Ashida M, Doi H, Nomura N, Takahashi H, Hanawa T, Wakabayashi N. Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting J. Mech. Behav. Biomed. Mater.. 2016.06; 59 446-458.

  27. Tsutsumi Y, Niinomi M, Nakai M, Shimabukuro M, Ashida M, Chen P, Doi H, Hanawa T. Electrochemical surface treatment of a β-titanium alloy to realize an antibacterial property and bioactivity Metals. 2016.03; 6 (4): 76. ( DOI )

  28. Chen P, Nagai A, Tsutsumi Y, Ashida M, Doi H, Hanawa T . Differences in the calcification of preosteoblast cultured on sputter-deposited titanium, zirconium, and gold J Biomed Mater Res A. 2016.03; 104 (3): 639-651. ( PubMed, DOI )

  29. Tsutsumi Y, Nishisaka T, Doi H, Ashida M, Chen P, Hanawa T. Reaction of calcium and phosphate ions with titanium, zirconium, niobium, and tantalum Surf Iinterface anal. 2015.12; 47 (13): 1148-1154. ( DOI )

  30. Okamoto H, Tsutsumi Y, Watanabe M, Yamakage K, Ashida M, Chen P, Doi H, Miura H, Matsumura M, Hanawa T. Evaluation of release and accumulation of metal ions from titanium and nickel by accelerated dissolution test in simulated body environments Electrochemistry. 2015.12; 83 (12): 1048-1052. ( DOI )

  31. Umezawa T, Chen P, Tsutsumi Y, Doi H, Ashida M, Suzuki S, Moriyama K, Hanawa T. Calcification of MC3T3-E1 cells on titanium and zirconium Dental Materials Journal. 2015.10; 34 (5): 713-718. ( DOI )

  32. Ashida M, Sugimoto T, Nomura N, Tsutsumi Y, Chen P, Doi H, Hanawa T. Microstructure and mechanical properties of large-scale ingots of the Zr-1Mo alloy Mater. Trans.. 2015.07; 56 (9): 1544-1548. ( DOI )

  33. Ashida M, Chen P, Doi H, Tsutsumi Y, Hanawa T, Horita Z. Superplasticity in the Ti-6Al-7Nb alloy processed by high-pressure torsion Mater. Sci. Eng. A. 2015.06; 640 449-453. ( DOI )

  34. Yu M, Chen P, Tsutsumi Y, Doi H, Ashida M, Kasugai S, Hanawa T. Formation of white oxide layer on Zr-14Nb alloy using thermal treatment Dent. Mater. J.. 2014.08; 33 490-498.

  35. Edalati K, Ashida M, Horita Z, Matsui T, Kato H. Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion Wear. 2014.02; 310 83-89. ( DOI )

▼display all

Conference Activities & Talks 【 display / non-display

  1. Ashida M, Chen P, Takizawa Y, Yumoto M, Umise A, Tahara M, Hosoda H, Horita Z, Hanawa T. Microstructural development and strengthening of Ti-6Al-7Nb alloy by severe plastic deformation. The 7th International Symposium on Biomedical Engineering (ISBE2022) 2022.11.25 Online

  2. Ashida M. Strengthening of titanium alloy by severe plastic deformation for dental narrow implants. The 7th Joint Symposium between IBB/TMDU and Chulalongkorn University 2020.12.22 オンライン

  3. Ashida M, Kitamura Y, Chen P, Doi H, Tsutsumi Y, Takizawa Y, Yumoto M, Otagiri Y, Horita Z, Hanawa T. Strengthening of Ti-6Al-7Nb alloy by high-pressure sliding. International Workshop on Giant Straining Process for Advanced Materials in 2018(GSAM2018) 2018.09.03 Fukuoka, Japan

  4. Ashida M, Chen P, Doi H, Tsutsumi Y, Horita Z, Hanawa T. Strengthening of Ti-6Al-7Nb alloy with bimodal microstructure by high-pressure torsion. International Workshop on Giant Straining Process for Advanced Materials (GSAM2017) 2017.09.03 Fukuoka, Japan

  5. Ashida M, Chen P, Doi H, Tsutsumi Y, Hanawa T, Horita Z. Superplasticity of biocompatible Ti-6Al-7Nb alloy after processing by high-pressure torsion. 12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015 2015.09.08 Tokyo, Japan

  6. Ashida M, Chen P, Doi H, Tsutsumi Y, Hanawa T, Horita Z. Effects of initial microstructure on the resultant microstructure and mechanical properties of Ti-6Al-7Nb alloy after HPT processing. International workshop on giant straining process for advanced materials (GSAM2015) 2015.09.03 Fukuoka, Japan

  7. Ashida M, Chen P, Doi H, Tsutsumi Y, Hanawa T, Horita Z. Effects of grain refinement by high-pressure torsion on mechanical properties of Ti-6Al-7Nb. The 13th World Conference on Titanium (Ti-2015) 2015.08.16 San Diego, California, USA

  8. Ashida M, Chen P, Doi H, Tsutsumi Y, Hanawa T. Influence of heat treatment on mechanical properties of Ti-6Al-7Nb processed by severe plastic deformation. The 6th International Symposium on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AMDI-6) 2015.06.09 Tokyo,Japan

▼display all